Gilcraft Boats Queenscliff

Gilcraft Rêveur 28 Sign In or Register to add photos

« Back to Gallery 122 Photos
Gil making a scale model of the new design.
0
0
Lofting the frame.
0
Setting out the Mahongany frame.
0
Epoxy gluing the stem.
0
0
Screwing and glueing the stem together.
0
Cut and scalf the Kauri stringers.
0
0
0
Stand the frame up
0
Setting the keal.
0
Bend the stringers around the frame.
0
15 mm marine ply for the bottom.
0
First layer of 12' planks on the top sides to achieve the flare.
0
0
0
0
0
Second layer of 2mm ply.
0
West System epoxy fibre glass the hull, apply peel fly sheet.
0
Remove the peel ply sheet when the epoxy glass is dry. This produces and even fininsh.
0
0
Fibre Glass the planing strakes.
0
Sprayed guide coat ready for filling.
0
Blade fill the surface then sand back.
0
Spray high build filling primer.
0
0
The bottom is finished with a PPG 2 x pack Polyurathane.
0
Turning the boat over
0
0
0
The interior of the hull is sealed with a PPG Epoxy coating.
0
The sheer line is finally formed.
0
0
PCM Motors is in.
0
Gil setting out the deck beams.
1
Working on the seat framing.
0
0
1
0
0
Apply the black epoxy lines
0
0
Gil, Darren and Ben kick back on the new seats.
1
0
0
0
0
0
0
0
0
0
0
Gil and Nancy Allbutt
0
0
0
0
0
1 2 3
1 - 60 of 122 Photos
Rss_feed

Members Area

Photo Categories